Pre-Assembled Industrial Door (PAID)
featuring the traditional dependability and sturdiness of
a commercial door
Roll Up Doors Direct has once again raised the bar with the Model
1000 commercial door. The Pre-Assembled Industrial Door (PAID)
features the traditional dependability and sturdiness of a commercial door,
while significantly saving time and money during installation. How? The
pushup operation comes with brackets and tensioner pre-assembled.The reduced
drive chain hoist operation is delivered with brackets, tensioner, gears and
chain drive pre-assembled on the door. In addition, door and guides install
to jamb as a single assembly. Pre-assembly from the factory means less time
spent on installation, therefore saving you money. Backed by a one year
warranty, our PAID Model 1000 is a solid and economical investment
for commercial/industrial usage.
A team of experienced door experts is available to assist
you with any of your door needs.
**Please note that all of our doors are made to your
opening size - If you dont find the size you need please call us at
Roll up door model 1000 Features
26 gauge corrugated door curtain is manufactured from full hard galvanized
grade 80 steel and coated with Super Durable Polyester
paint that is backed by a 40 year film integrity and a 25 year no-fade
limited paint warranty. Available in sizes up to 12’0” x 14’0” and in over
20 standard colors.
durable, wide, heavy-duty nylon stripping controls curtain stretch
and works in conjunction with the vinyl guide strip to reduce wear and ddeaden sound.
slide bolt lock assembly affixed to the bottom bar at each end of the door
curtain fastens through the guide to securely keep the door locked and in
the down position. Padlocks can be attached to the slide to further secure
flat door stop slide makes installation quicker. Simply slide through the
holder on the guide and affix with a fastener.
½” diameter drums allow for lower headroom requirements. An
enclosed barrel houses the dead axle assembly and protects the
factorylubricated springs from direct contact with environmental elements.
The inherent strength provided by the spiral barrel minimizes axle
deflection, providing smoother operation. Because the
curtain is attached by screws and not seamed to the barrel, cost-effective
replacement of either independent assembly is quick and easy..
shielded radial ball bearings at the drums provide longevity and smooth
operation. Drums are embossed for rigidity.
cam-action spring tension holding device allows quick, easy and equal
adjustment of the tension on all springs simultaneously from one end of the
door. The cam tensioner bites into the axle helping to eliminate the
unwanted spinning of the axle during the initial spring loading or
Roll Up Doors Direct ratchet tensioning device supplied as standard
equipment on our door offers a simpler method of tensioning, while more
accurately fine tuning all the springs on the door at the same time. There
is no extra hardware required. Eight different positions on
the tension wheel allow one to perfectly balance the door every time. There
are no pins required to hold the tension on the spring. You simply
just click it.
4:1 reduced drive chain hoist offers smoother operation on doors over 10’0”
wide or 10’0” tall. Chain hoist comes pre-assembled on door. Factory-installed galvanized reinforced 12 gauge brackets are
designed to easily snap onto the guides, reducing installation time.
Pantheon range of low voltage DC operators are designed to fit enclosed
internally in the barrel of the rolling door, providing quiet and efficient
operation but requiring only minimal side room. The logic controller is
designed to be readily compatible with external transmitters, receivers,
photo eyes and sensing edges. The operator is always fitted to the right
is made of a foil-backed, dual-layer polyethylene air-bubble insulation
secured in place with a strong adhesive and joined by mylar film to provide
an R value of 4 (top draft stop and side draft stops are also included).
Model 1000I only.
top draft stop mounted to the door curtain provides a 2 ¾” weather seal
between the door and the header.
is made of a foil backed, dual layer of heavy-duty polyethylene air-bubble
insulation secured in place with a strong adhesive and joined by mylar film
to provide an R value of 4. (Top draft stop and side draft stops are also
The header seal attaches directly to the header and extends up to 5” to
the door curtain to form an effective barrier from environmental elements./p>
UUniversal mount 2” deep 16 gauge galvanized steel guides require no
pre-installation modifications for wood, steel, concrete or masonry block
applications. Guides have deeper engagement, which allows the curtain to
stay in place under more severe wind conditions.
Model Information Brochures