Welcome to the Roll Up
Doors Direct web site, high quality, factory direct pricing with all the
extras included.
At Roll Up Doors Direct, we sell Self
storage roll up doors, commercial rollup doors and industrial roll-up
doors direct to you.
Normal Duty Roll Up Door
Model 650
PLEASE CALL FOR A PRICE QUOTE 1-3877-RLDOORS(753-6677)
Roll
Up Doors Direct
Model 650 Self-Storage Door
The
Model 650 Mini Storage Door is
designed and manufactured with
durability, quick installation and
ease of maintenance in mind.
Features standard to this door
eliminate the need for extra options
or upgrades. Time is money so you
save money since we ship your self
storage door with the latch,
brackets and tensioner already in
place. With our Roll Up Doors
Direct door, you
simply snap the brackets into the
guides and the door is ready to
stand.
Features of the Model 650
Mini Storage Door
Door
Springs - During production,
each spring is coated with a
generous amount of grease that
penetrates the innermost pores of
the spring with additives,
displacing moisture and preventing
the formation of rust and
corrosion. In addition, this
process relieves the friction
created between spring coils,
thereby providing smoother door
operation. Finally, the spring and
axle assembly is enclosed in a tube
to protect them from the elements
encountered throughout the life of
the door.
Package
Protection and Shipping -
Doors stacked on top of each other
in transit are going to
shift...unless they can be packaged
in a way to minimize the sliding
that occurs during that time.
Roll Up Doors Direct
has found a solution. Each door is
suspended individually in the
crates. Whether they travel down
the block or across the country,
compaction damages, door abrasions
and chatter marks are virtually
eleminated.
Ratchet
Tensioning Device - The Roll
Up Doors Direct
ratchet tensioning device, supplied
as standard equipment on our door,
offers a simpler method of
tensioning while more accurately
fine tuning all the springs on the
door at the same time. There is no
extra hardware required. Eight
different positions on the tension
wheel allow one to perfectly balance
the door every time. There are no
pins required to hold the tension on
the spring...you simply just click
it.

Radial Ball Bearings - Roll
Up Doors Direct
supplies radial ball bearings at no
additional cost to you. Our
pemanently
lubricated
bearings require no maintenance and
are guaranteed to last the entire
life span of the door.
Door Stops - Our removable
door stops are simple to install and
prevent the curtain from over
traveling the guide when raising the
door.
Head
Axle and Torque Tube Assembly
- This design, noted for its
durability and smoother operation
with commercial applications, has
now been incorporated into the Roll
Up Doors Direct
self storage door. The tube housing
protects the springs and strenghtens
the axle. Eliminating axle push and
shift that can occur with a live
axle, the dead axle design allows
for a straighter travel path of the
door curtain in the guides. The
greatest feature of this design is
that it affords the fine tuning of
any spring adjustment to equally
affect all springs on the dor at the
same time.
Magnetic
Stainless Steel Latch - Our
new patented mini latch features a
cover plate made from a heavy gauge
of stainless steel. In addition,
the latch cover protects the slide
from tampering by completely
covering the slide with the
exception of a tab used to operate
the latch. To further secure the
door, the latch's two-inch throw
with its magnetic properties can be
incorporated with the new
guide-mounted security devices.
This versatile design affords the
ability for you to utilize padlocks,
cylinder licks or both.
Feature List for the Roll Up Doors
Direct Model 650
mini storage roll up door:
-
All Drums
are fitted with a grease
filled, shielded radial ball
bearing to contribute to a
smoother operation and
reduce wear and friction.
-
Factory installed galvanized
reinforced 12 gauge
Brackets are
designed to easily snap onto
the guides, reduing
installation time.
-
Galvanized, guide-mounted
Head Stops
are simple to install and
prevent curtain over travel
when raising the door.
Installed through the guide
after curtain is lowered,
they provide definite
contact with the bottom bar
angle and stop clips.
-
The Ratchet
Tensioning Assembly
is factory installed on the
end of the door axle and
allows precise fine tuning
of the initial spring
tension. Increments of 1/8
turn are possible.
Tensioner adjusts both
springs equally at the same
time from only one end of
the door.
-
Roll
formed clear acrylic coated
galvanized steel
Bottom Bar
reinforced with a 2" x
1-1/2", 11 gauge full width
galvanized angle that
extends fully into the
guides. The PVC bulb
astragal provides positivie
contact with floor. Lift
handle(s) and stop clips
installed on exterior side
of bottom bar and a
non-rotting pull rope is
attached to the inside
angle.
-
Oil
tempered helical torsion
Springs are
factory lubricated to
minimize friction and
corrosion while increasing
the spring cycle life.
Spring wire conforms to ASTM
A 229.
-
Full
width galvanized steel
Barrel
totally encloses the drums,
springs and axle.
Barrel-type construction
redues door sag, eliminates
drum dents and improves
operation due to an even
support of the curtain for
the entire width.
-
Galvanized and pre-painted
with long lasting silcone
polyester paint, the 26
gauge Corrugated
Curtain is roll
formed from ASTM A 653 grade
80 full hard steel. This
premium steel yields greater
door strength and minimized
curtain damage. Full height
felt tape on back of curtain
prevents nesting and reduces
paint rubbing. 20 colors
are standard with others
available on special order.
-
Roll
formed 18 gauge galvanized
guides are
fitted with dual
polyethylene wear strips to
reduce friction and muffle
door noises. All guide
attachment to jamb is
performed through the guides
without the addition of
clips welded to the back of
the guide. This gives a
neater appearance, increased
strength and aids in tight
installations.
-
Standard stainless steel
cover, slide and four
attachment bolts are factory
installed. The slide
exhibits magnetic properties
that can be used to activate
a guide mounted security
sensor. Latch
accepts all industry
padlocks, including 7/16"
diameter shanks. Provision
for cylinder lock included.
Please Note:
All doors under 10' wide and 10'
tall are manual lift, pull rope
lowered. Commerical doors more than
10' wide or 10' tall come with a
standard reduced drive chain hoist.
Click here to view a Shop
Drawing and Installation Guide for
the Model 650 mini storage door.
Sometimes a picture, or in this
case, a video is worth a 1000
words. Click here to access our
Roll Up Doors Direct website and view an
installation video for the Model 650
mini storage door.
|
{Top} |