|
Our Model 551 is the economical choice for an
efficient, performance oriented rolling steel door with the same proven
reliability as our entire line of doors. Constructed of roll formed
hot-dipped galvanized steel, the Model 551 is a practical, low cost
alternative to a slat type rolling or commercial sectional door.
Available in 22 pre-finished colors, like our entire line of rolling
steel doors, The Model 551 features a polyester base and top coat to
provide a long lasting durable finish, eliminating the added expense of
field painting.
Quality design and strong construction allows for mounting to wood,
masonry, or steel jambs. The Model 551 is identical in appearance to our
other models, allowing the use of several models on the same job site.
Our Model 551 door is economical, durable—and a little wiser for the
wear. When cost is a major consideration, the Model 551 is the door of
choice, designed economically without sacrificing performance,
craftsmanship, or aesthetics.
FEATURES & BENEFITS
Guides manufactured from 18 gauge hot-dipped galvanized steel
for wood, masonry or steel mounting (optional steel mounting plates
required for steel jamb installation).
Available in 22 pre-finished siliconized polyester paint finishes
(see Color Chart)
.Available in sizes up to 12' (3658mm) wide
and 14' (4267mm) high.
Curtain manufactured from 26 gauge corrugated hot-dipped galvanized
steel.
Exterior polypropylene wear strips provide smooth, quiet operation
and reduce friction.
A low cost alternative to slat type doors.
AVAILABLE OPTIONS
Laminated foil-bubble type insulation to provide a thermal barrier.
LGO Electric Operators.
Draft Stop.
EZ-Install Packaging.
|
Installation Requirements |
|
DOOR
HEIGHT
|
MINIMUM
SIDEROOM
|
MINIMUM
HEADROOM
|
|
Hand Operated - Pull Rope
|
|
Up to 8'
|
4.5"
|
16"
|
|
Up to 10'
|
4.5"
|
17"
|
|
Chain Operated - Reduction Gear
|
|
Up to 8'
|
6"
|
16"
|
|
Up to 10'
|
6"
|
17"
|
|
Up to 12'
|
6"
|
18"
|
|
Up to 14'
|
6"
|
19.5"
|
|
Light Duty Roll-Up Door - Model 551 |
| |
|
|
|
|
List Prices |
|
FEATURES: |
|
|
COLORS: |
|
Version 8.02 |
|
* Polypropylene wear strip on exterior side of curtain |
* Interior color is always white. White both sides |
|
* Headroom requirements as low as 18" above door opening |
will be furnished unless otherwise specified |
|
* Heavy duty bottom bar with galvanized reinforcement angle |
* Exterior color is a full color coat of baked |
|
and vinyl bulb astragal |
|
|
siliconized polyester over a coat of primer |
|
* Hot-dipped galvanized steel guides |
|
on hot dipped galvanized steel |
|
|
* 80,000 cycle springs and 1 5/16" tubular axle suspended |
* Colors available: Gloss White, Satin White, |
|
in steel ball bearings |
|
|
Cobalt Blue, Polar Blue, Royal Blue, Duro |
|
* Full galvanized sheet barrel, 12" diameter |
|
Bronze, Chocolate Brown, Calypso Green, |
|
* Available for steel, masonry or wood jambs |
Hunter Green, Marine Green, Dark Teal, Public |
|
* Includes all hardware, slide bolt locks, and |
|
|
|
Orange, Urgent Orange, Patriot Red, Oxford |
|
hot-dipped galvanized guides. |
|
Gray, Lighthouse Red, Lightstone Tan, Natural |
|
* 2" deep 18 gauge steel guides |
|
Tan, Ultra Blue, Extra Green, Garnet Red, |
| |
|
|
Bright Yellow, and Galvalume |
|
|
MODEL 551 - Light Duty Roll-Up Door |
|
|
|
|
|
|
|
|
|
|
|
Boxed Ready To Ship |
Opening Height |
|
Up to 8'0" |
8'1" to 10'0" |
10'1" to 12'0" |
12'1" to 14'0" |
|
Opening Width |
(Headroom 18") |
(Headroom 20") |
(Headroom 22") |
(Headroom 22") |
|
Up to 8'0" |
431 |
475 |
600 |
726 |
|
8'1" to 10'0" |
462 |
509 |
652 |
819 |
|
10'1" to 12'0" |
518 |
670 |
724 |
927 |
|
Note: Prices in gray
shaded area include reduced-drive chain hoist. |
|
|
MISCELLANEOUS |
|
|
|
|
|
|
Top header seal (per lineal foot of width) |
|
|
|
$ 1.60
|
|
Guide weather seal (per foot of door height) |
|
|
|
$ 3.28
|
|
Hi-Tech foil insulation (per square foot) |
|
|
|
$ 4.33
|
|
Reduced Drive or Shaft Drive
(specify)
chain hoist for manually operated doors (non-shaded areas) |
$ 121.20
|
|
Note: Chain hoist
includes special mounting bracket and sprocket |
|
|
|
Electric Operator Kit (includes 72 tooth #40 door sprocket and roller
chain) |
|
$ 38.32
|
|
Deduct if reduced drive chain hoist is not required
for chain operated doors (shaded areas) |
$ (117.60) |
|
Steel mounting plates for steel skin buildings, manually operated (per
pair) |
|
$ 22.20
|
|
Steel mounting plates for steel skin buildings, reduced drive chain
hoist (per pair) |
|
$ 26.40
|
|
Packaging LTL shipment (per lineal foot of width or height, whichever is
greater) |
|
$ 9.90
|
|
Effective: 09/22/08 |
|
|
|
|
Prices and/or specifications are subject
to change without notice. |
|
